WATERPROOFING SILO TANK ROOF

[vc_row][vc_column][vc_custom_heading text=”WATERPROOFING SILO TANK ROOF” font_container=”tag:h2|text_align:center” use_theme_fonts=”yes”][vc_column_text]PROJECT:  Waterproofing the roof of the large Silo tank in the Silo Park, North Wharf, Auckland City

ADDRESS:  Wynyard Quarter, Auckland Waterfront

MAIN CONTRACTOR:  Yakka Demolition

CONTRACT APPLICATOR:  Rhino Linings Central Auckland

SPECIFICATIONS:  Rhino Linings Tuff Stuff[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”3232″ img_size=”large” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]The badly corroded steel roof of the large concrete cement Silo 7 was decaying and leaking.  The Silo 7 roof was shrink wrapped, surplus objects were removed and repairs made.  Rhino Linings Tuff Stuff was spray applied providing a seamless, robust, water proofing membrane.

The Silos present at Silo Park were giant containers used for holding cement.  Silo 7 was just one of the Silos that made up the tank farm that is responsible for holding substantial amounts of the cement. During the summer season, Silo Park plays host to many events including screening of outdoor movies on to the side of the wall of Silo 7.

This project was undertaken and completed by Rhino Linings Central Auckland.

Contact David  on Mob 021 226 7800, or

Email:

da***@rh****.nz











.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_single_image image=”3233″ img_size=”large” alignment=”center”][/vc_column][vc_column width=”1/3″][vc_single_image image=”3243″ img_size=”large” alignment=”center”][/vc_column][vc_column width=”1/3″][vc_single_image image=”3235″ img_size=”large” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”3234″ img_size=”large” alignment=”center”][/vc_column][/vc_row]

/by

APARTMENT ROOF WATERPROOFING

[vc_row][vc_column][vc_custom_heading text=”APARTMENT ROOF WATERPROOFING” font_container=”tag:h2|text_align:center” use_theme_fonts=”yes”][vc_column_text]PROJECT:  18 Ron Wood Ave, Manukau

CONTRACT APPLICATOR:  Rhino Linings Central Auckland

COMPLETION DATE:  November 2015

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”3248″ img_size=”large” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]The body corporate contacted David at Rhino Linings Central Auckland wanting a cost effective solution to their roof waterproof problems.

The leaking butynol roof liner was removed, repairs made and Rhino Linings Tuff Stuff spray applied to provide a seamless, waterproofing membrane.

This project was undertaken and completed by Rhino Linings Central Auckland.

Contact David  on Mob 021 226 7800, or

Email:

da***@rh****.nz











.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”3250″ img_size=”large” alignment=”center”][/vc_column][vc_column width=”1/2″][vc_single_image image=”3249″ img_size=”large” alignment=”center”][/vc_column][/vc_row]

/by

NAENAE REGIONAL BOWLS CENTRE

[vc_row][vc_column][vc_custom_heading text=”NAENAE REGIONAL BOWLS CENTRE” font_container=”tag:h2|text_align:center” use_theme_fonts=”yes”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]PROJECT:  Waterproofing of Steel Roof Beams 

ARCHITECT:  Tennent Brown Arhitects

ADDRESS:  135 Witako St, Epuni, Lower Hutt 5011

PRODUCTS:  Rhino Linings tuff Stuff

MAIN CONTRACTOR:  Hawkins Construction

APPLICATOR: NZ Vision Contracting[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”3308″ img_size=”large” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]The Regional Bowls Centre is a response to the amalgamation of Naenae and Park Avenue Bowling Clubs.

The new indoor bowls centre was built on the existing site of the Park Avenue Bowling Club, providing a dedicated, international sized indoor bowling green.

The distinctive feature of this building is the large tensile membrane roof that forms a canopy over the indoor green. An efficient xanadome structure of four steel tube arches allows a height of 11m in the centre of the dome.

The exterior steel structural beams around the canopy perimeter were waterproofed using Rhino Tuff Stuff spray membrane enabling the steel beams to operate as gutters for the canopy.

This project was undertaken and completed by NZ Vision Contracting Ltd

Contact Clive Graham on mob 021 933 642, or

Email:

cl**********@vi********.nz











.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”3323″ img_size=”full” alignment=”center”][/vc_column][vc_column width=”1/2″][vc_single_image image=”3324″ img_size=”large” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”3327″ img_size=”full” alignment=”center”][vc_single_image image=”3328″ img_size=”full”][/vc_column][/vc_row]

/by

PUKEKOHE CAR PARK & OFFICE DEVELOPMENT

[vc_row][vc_column][vc_custom_heading text=”PUKEKOHE CAR PARK & OFFICE DEVELOPMENT” font_container=”tag:h2|text_align:center” use_theme_fonts=”yes”][vc_column_text]PROJECT:  Coating/Waterproofing of a 4000m² three level Car Park

PROJECT CONTRACTOR:  Watts and Hughes

PROJECT SPECIFICATION:  Tremco Vulkem 350/345/346

CONTRACT APPLICATOR:  Polymer Group Ltd, Contracting Division[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”3287″ img_size=”large” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Project Brief:                 

Captive shot blast the surface, stripe coat the joints with Vulkem 171 Primer and Vulkem 350R and apply a layer of Vulkem 350 Membrane followed by Vulkem 346 Topcoat.

 This project was undertaken and completed by Polymer Group Ltd

Contact Ron Avery on mob 021 956 211, or

Email:

av***@po*****.nz











            [/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”3286″ img_size=”large” alignment=”center”][/vc_column][vc_column width=”1/2″][vc_single_image image=”3284″ img_size=”large” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”3288″ img_size=”large” alignment=”center”][/vc_column][/vc_row]

/by

FONTERRA WAITOA – WAIKATO POWDER “D” ROOF

[vc_row][vc_column][vc_custom_heading text=”FONTERRA WAITOA – WAIKATO POWDER “D“ ROOF” font_container=”tag:h2|text_align:center” use_theme_fonts=”yes”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]PROJECT:  Vulkem Crack Repairs – Polyurea 2.0mm Membrane

PROJECT SPECIFICATION:  Tremco Vulkem 350R, Polyurea at 2 litres/m² (nominal 2.0mm thickness) over the entire roof area

CONTRACT APPLICATOR:  Polymer Group Ltd, Contracting Division

This project was undertaken and completed by Polymer Group Ltd

Contact Ron Avery on mob 021 956 211, or

Email:

av***@po*****.nz











[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”3277″ img_size=”large” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Project Specification:  

Strip the old membrane.  Rout out all cracks.  Apply the membrane sealant into the cracks.  Stripe coat all the cracks with Vulkem 350R and inlay a reinforced bandage.

Apply 2.0mm elastomeric liquid applied polyurethane membrane.

Finish coat with 2.0 mm thickness sprayed polyurea.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_custom_heading text=”REPAIR AND PROTECTION OF MEMBRANE ROOF” font_container=”tag:h2|text_align:center” use_theme_fonts=”yes”][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_single_image image=”3278″ img_size=”large” alignment=”center”][/vc_column][vc_column width=”1/3″][vc_single_image image=”3280″ img_size=”large” alignment=”center”][/vc_column][vc_column width=”1/3″][vc_single_image image=”3281″ img_size=”large” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”3279″ img_size=”large” alignment=”center”][/vc_column][/vc_row]

/by

OCEANSIDE APARTMENTS MT MAUNGANUI

[vc_row][vc_column][vc_custom_heading text=”OCEANSIDE APARTMENTS MT MAUNGANUI” font_container=”tag:h2|text_align:center” use_theme_fonts=”yes”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]PROJECT:  Level 1 Balcony Nib rebuild and waterproofing

CLIENT:  The Towers Body  Corporate

ENVIRONMENT:  High UV, Salt Air, Pedestrian Traffic

PRODUCTS: Endurabond floor Screed Epoxy Mortar, Aquagard M membrane, Ceramic Quartz Rhino, Permaglaze

ARCHITECTS:  Veron Building Consultants

MAIN CONTRACTOR:  Watts & Hughes

CONTRACT APPLICATOR:  Bay Protective Coatings – Pierre mob 021497822[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”3313″ img_size=”large” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Project Brief:                 

To strip the existing ceramic tiles and failed butynol membrane from the balconies.  Build plinths and raise the joinery to the required height.  Re-profile the deck to falls, crack repairs, waterproof and apply decorative coloured ceramic stone finish.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”3258″ img_size=”large” alignment=”center”][/vc_column][vc_column width=”1/2″][vc_single_image image=”3257″ img_size=”large” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]The existing balcony membrane had failed allowing water to penetrate through the concrete decks into the ceilings of the café’s underneath.  Polymer Group Ltd provided a robust waterproofing solution to the problem which waterproofed the structure for the café’s and gave a decorative tile pattern to the decks above.

This project was undertaken and completed by Bay Protective Coatings.

Contact Pierre on Mob 021 497 822, or

Email:

pi****@ba*******************.nz











.[/vc_column_text][/vc_column][/vc_row]

/by

CAREYS GULLY SEWERAGE TANK LINING

[vc_row][vc_column][vc_custom_heading text=”CAREYS GULLY SEWERAGE TANK LINING” font_container=”tag:h2|text_align:center” use_theme_fonts=”yes”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]PROJECT:  Applying a protective lining to an aged concrete sewerage tank, Carys Gully Wellington

CLIENT:  Wellington District Council

ENVIRONMENT:  Corrosive environment

MAIN CONTRACTOR:  United Water / Veolia Water

CONTRACT APPLICATOR:  NZ Vision Contracting Ltd

SUBSTRATE:  Concrete lined steel

SPECIFICATION:  Rhino Linings SP150 Primer, RhinoChem 2170 Polyurethane Spray Lining[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”3267″ img_size=”large” alignment=”center”][/vc_column][vc_column width=”1/2″][vc_single_image image=”3269″ img_size=”large” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Job Description:          

One of two aged unlined concrete waste water tanks with severe corrosion of the concrete wall substrate.

The concrete surface was cleaned, high pressure water blasted and the biogenically affected concrete treated.

Repairs were then made to the concrete substrate prior to priming and spray application of the RhinoChem 2170 chemical and abrasion resistant polyurethane protective lining.

This project was undertaken and completed by NZ Vision Contracting Ltd

Contact Clive Graham on mob 021 933 642, or

Email:

cl**********@vi********.nz











.[/vc_column_text][/vc_column][/vc_row]

/by

SUTHERLANDS 1 RESERVOIR TANK LINING

[vc_row][vc_column][vc_custom_heading text=”SUTHERLANDS 1 RESERVOIR TANK LINING” use_theme_fonts=”yes”][vc_column_text]PROJECT: Polyurea Waterproofing of concrete water tank roof

OWNER/CONSULTANT: Christchurch City Council / City Care

ADDRESS:  Sutherlands 1 Reservoir Christchurch

PRODUCTS:  Aquagard M Primer, Endurathane 6000 Polyurea, Ultraure A-80 Topcoat

CONTRACTOR:  NZ Spray Linings[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”3218″ img_size=”large” alignment=”center” title=”Waterproofing concrete water tank roof”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Water is pumped around the Christchurch city fringe and stored in water tanks for supply to the outer suburbs.  Because Christchurch City water is not chlorinate, dall contaminants must be kept out of the water storage tanks. The tank roof no longer provided a complete seal and could allow contaminants to enter the reservoir tank.

The segmented concrete tank roof joints were not repairable.  City Care requested a monolithic seamless membrane be installed to keep out contaminants.

The 44 roof joints were addressed and a polyurea spray lining applied over the concrete roof followed by a decorative top coat.

The project was carried out in August/September 2015 and managed around snow and strong winds.  The project was completed September 2015.

This project was undertaken and completed by NZ Spraylinings.

Contact Doug Ledbrook on Mob 021 399 640, or

Email:

do**@nz************.nz











.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”3220″ img_size=”large” alignment=”center”][/vc_column][vc_column width=”1/2″][vc_single_image image=”3219″ img_size=”large” alignment=”center”][/vc_column][/vc_row]

/by

NELSON STREET CYCLE WAY

[vc_row][vc_column][vc_custom_heading text=”NELSON STREET CYCLE WAY” font_container=”tag:h2|text_align:center” use_theme_fonts=”yes”][vc_column_text]

PROJECT:                           Nelson Street Pink Cycle Way will link the Upper Queen Street

                                            Bridge to “Quay” Street via a shared path and separated

                                            Cycle lanes in 2 stages. Te Ara Whiti – The light Path.

Client:                                NZTA, Auckland Council and Auckland Transport

Environment:                  Pedestrian and cycle traffic

Job Description:              Nelson Street cycle Way—total area 3500m² and 150m² Koru Artwork

Project Brief:                   To give the cycle way and pedestrian path a vivid decorative non-skid finish.  A bright magenta                                                          colour was chosen by the architect.

Products:                          Enduragrip PU High Performance Coloured High Friction Surfacing Treatment

Engineer:                          GHD Consultants

Main Contractor:            Hawkins Ltd

Contract Applicator:      Resin Surfaces Ltd[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”2532″ img_size=”full” alignment=”center”][vc_column_text]Enduragrip PU High Performance Coloured High Friction Surfacing Treatment is a rapid cure, 100% solids, solvent free, high build, semi-flexible polyurethane binder used with high PSV magenta coloured aggregate providing high friction surfaces on the former motorway asphalt surface.  Enduragrip  PU High Performance Coloured High Friction Surfacing Treatment provides a decorative trafficable surface with excellent skid resistance in both wet and dry conditions.  Enduragrip PU adhesive binder was applied and then dressed to excess using the chosen magenta coloured aggregate.  Enduragrip PU High Performance Coloured High Friction Surfacing Treatment is applied by trained applicators.  The cycleway is a mixture of shared pedestrian and cycling paths and two-way, on-road cycle lanes separated from the general traffic by raised buffer islands.

This project was undertaken and completed by Resin Surfaces.

Contact Mike Coote mob 027 738 5952, or

Email:

mi**@re***********.nz











.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”2535″ img_size=”large” alignment=”center”][/vc_column][vc_column width=”1/2″][vc_single_image image=”2534″ img_size=”large” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”2533″ img_size=”large” alignment=”center”][/vc_column][/vc_row]

/by

For further information or to contact a Polymer Group representative

CONTACT US