SUTHERLANDS 1 RESERVOIR TANK LINING

[vc_row][vc_column][vc_custom_heading text=”SUTHERLANDS 1 RESERVOIR TANK LINING” use_theme_fonts=”yes”][vc_column_text]PROJECT: Polyurea Waterproofing of concrete water tank roof

OWNER/CONSULTANT: Christchurch City Council / City Care

ADDRESS:  Sutherlands 1 Reservoir Christchurch

PRODUCTS:  Aquagard M Primer, Endurathane 6000 Polyurea, Ultraure A-80 Topcoat

CONTRACTOR:  NZ Spray Linings[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”3218″ img_size=”large” alignment=”center” title=”Waterproofing concrete water tank roof”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Water is pumped around the Christchurch city fringe and stored in water tanks for supply to the outer suburbs.  Because Christchurch City water is not chlorinate, dall contaminants must be kept out of the water storage tanks. The tank roof no longer provided a complete seal and could allow contaminants to enter the reservoir tank.

The segmented concrete tank roof joints were not repairable.  City Care requested a monolithic seamless membrane be installed to keep out contaminants.

The 44 roof joints were addressed and a polyurea spray lining applied over the concrete roof followed by a decorative top coat.

The project was carried out in August/September 2015 and managed around snow and strong winds.  The project was completed September 2015.

This project was undertaken and completed by NZ Spraylinings.

Contact Doug Ledbrook on Mob 021 399 640, or

Email:

do**@nz************.nz











.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”3220″ img_size=”large” alignment=”center”][/vc_column][vc_column width=”1/2″][vc_single_image image=”3219″ img_size=”large” alignment=”center”][/vc_column][/vc_row]

/by

NELSON STREET CYCLE WAY

[vc_row][vc_column][vc_custom_heading text=”NELSON STREET CYCLE WAY” font_container=”tag:h2|text_align:center” use_theme_fonts=”yes”][vc_column_text]

PROJECT:                           Nelson Street Pink Cycle Way will link the Upper Queen Street

                                            Bridge to “Quay” Street via a shared path and separated

                                            Cycle lanes in 2 stages. Te Ara Whiti – The light Path.

Client:                                NZTA, Auckland Council and Auckland Transport

Environment:                  Pedestrian and cycle traffic

Job Description:              Nelson Street cycle Way—total area 3500m² and 150m² Koru Artwork

Project Brief:                   To give the cycle way and pedestrian path a vivid decorative non-skid finish.  A bright magenta                                                          colour was chosen by the architect.

Products:                          Enduragrip PU High Performance Coloured High Friction Surfacing Treatment

Engineer:                          GHD Consultants

Main Contractor:            Hawkins Ltd

Contract Applicator:      Resin Surfaces Ltd[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”2532″ img_size=”full” alignment=”center”][vc_column_text]Enduragrip PU High Performance Coloured High Friction Surfacing Treatment is a rapid cure, 100% solids, solvent free, high build, semi-flexible polyurethane binder used with high PSV magenta coloured aggregate providing high friction surfaces on the former motorway asphalt surface.  Enduragrip  PU High Performance Coloured High Friction Surfacing Treatment provides a decorative trafficable surface with excellent skid resistance in both wet and dry conditions.  Enduragrip PU adhesive binder was applied and then dressed to excess using the chosen magenta coloured aggregate.  Enduragrip PU High Performance Coloured High Friction Surfacing Treatment is applied by trained applicators.  The cycleway is a mixture of shared pedestrian and cycling paths and two-way, on-road cycle lanes separated from the general traffic by raised buffer islands.

This project was undertaken and completed by Resin Surfaces.

Contact Mike Coote mob 027 738 5952, or

Email:

mi**@re***********.nz











.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”2535″ img_size=”large” alignment=”center”][/vc_column][vc_column width=”1/2″][vc_single_image image=”2534″ img_size=”large” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”2533″ img_size=”large” alignment=”center”][/vc_column][/vc_row]

/by

VIADUCT HARBOUR AUCKLAND – Decorative Reflective non-slip walkway

[vc_row margin_top=”0″ margin_bottom=”20″][vc_column][vc_column_text]Applicator:            Resin Surfaces Ltd

Main Contractor:     Hawkins Construction

Design Consultant: Boffa Miskell[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]In readiness for the arrival of 2011–12 Volvo Ocean Race fleet into Auckland, 1,700m2 of Ballatini-Strada retro-reflective surfacing was applied to the pedestrian surfaces on Te Wero Island and Bascule bridge that provide access to Karanga Plaza and the Viaduct Events Centre at the Viaduct Harbour on Auckland’s Waterfront.

 

Ballatini-Strada is a coloured surfacing that uses coloured glass beads as aggregate. A combination of Blue, Orange, Green and White retro-reflective Ballatini-Strada surface was laid.

This project was undertaken and completed by Resin Surfaces.

Contact Mike Coote mob 027 738 5952, or

Email:

mi**@re***********.nz











.[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”129″ img_size=”large”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Completion date: February 2012[/vc_column_text][/vc_column][/vc_row]

/by

TANK INSULATION – Paritutu Tank Farm

[vc_row margin_top=”0″ margin_bottom=”20″ padding_left=”40″ padding_right=”40″ bg_position=”top” bg_repeat=”no-repeat” bg_cover=”false” bg_attachment=”false” padding_top=”40″ padding_bottom=”40″ parallax_speed=”0.1″][vc_column width=”1/1″][vc_column_text]Project: Insulation of Tank T-101, Paritutu Tank Farm, Taranaki
Environment: Coastal, atmospheric corrosivity category E-M
Owner: Shell Todd Oil Services
Products: Jotun Tankguard Storage / Endurathane SR52 / Enduracryl PUR Coating
Applicator: Polymer Group Ltd Contracting and Highgrade Coatings Ltd[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]Tank T-101 is a mild steel tank with floating lid. The tank is heated to prevent the build-up of waxes on the tank walls that could cause the floating lid to seize up.

The tank was stripped of its original thermal insulation and inspected for corrosion under insulation (CUI). It was then cleaned and abrasive blasted and Jotun Tankguard Storage was applied. Endurathane SR52 polyisocyanurate foam was spray applied . Finally the foam insulation was sealed and protected with Enduracryl PUR coating.

Jotun Tankguard Storage was recommended as the coating under insulation to prevent CUI.[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”463″ alignment=”center” border_color=”grey” img_link_target=”_self” img_size=”full”][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_column_text]Completion date: March 2012[/vc_column_text][/vc_column][/vc_row]

/by

For further information or to contact a Polymer Group representative

CONTACT US